Standard swash plate
Heli-Factory’s swashplates are very different from the swashplates of the market competitors.
For a long time now, Heli-Factory has not used ball pins onto which plastic ball joints are then pressed.
This type of connection is not safe during transport and many a ball joint has come off during transport or even in flight, leading to major problems in flight.
Heli-Factory uses connections from real helicopter construction and the ball joints with bushings are clamped with an M3 screw. Nothing can “jump out” here. This is long-lasting and reliable.
Heli-Factory also offers different diameters for different helicopters so that the linkages can be installed as straight as possible.
Our swashplates are assembled with dust-protected ball bearings and spherical bearings of the highest quality.
The swashplate outer diameter 85mm or 105mm, is available for 12mm and 15mm main rotor shafts.
120° swashplate has an outer diameter of 105mm.
Matching ball joints with ball for 3mm control rods and matching bolts with cap nuts are included.
Prices:
010002 version 2 blade 212,90€
010003 version 3 blade 219,90€
010004 version 4 blade 226,90€
010005 version 5 sheet 233,90€
Prices incl. 19% VAT.
When ordering with 3 point linkage simply state 120°.
Special designs on request
Swashplate guide aluminium 39,50€ / swashplate guide 3-piece brass 98,00€ / swashplate driver 79,00€ incl. 19% VAT.
Swashplates for scale rotor heads
These swashplates are based on the original and are manufactured for the respective rotor head and the corresponding dome. These swashplates are available for:
Gazelle, Blue Thunder
HF-Lama, Vario-Lama, Alouette II and III
H 130 and Ecuruil
BO 105
Bell 204-B
Swashplate guide 3-piece brass depending on version from 98,00€ / swashplate driver depending on version from 79,00€ incl. 19% VAT.
Special designs on request.
The rotor heads are available for 12mm and 15mm main rotor shafts.
Blade bearing shaft 12mm
Blade handles are available for 14mm and 22mm blade connections
Blade retaining screw M5 12.9
Flapping joints with adjustable damping.
Prices:
2 blades 539,00€ / 3 blades 698,00€ / 4 blades 929,00€ / 5 blades 1098,00€ each without rotor head cover.
2 blade head rotor head cover (lid) 49,50€
2 blade Scale Rigid (with paddle bar) 798,00€
Surcharge for 22mm blade handle 39,50€ per pc.
Rotor head cover 125mm with mounting adapter 155,00€ incl. 19% VAT.
Super Scale rotor head for Alouette II, Alouette III and Lama and for 12mm and 15mm rotor shaft.
Blade handle mount 14mm for rotor diameters up to 2,6 meter.
Price: 2298,00€ incl. 19% VAT.
Super Scale rotor head for Blue Thunder and Gazelle with 12mm or 15mm rotor shaft.
Blade handle mount 14mm for rotor diameter up to 2,6 meter.
Price: 2298,-€ incl. 19% VAT.
Super Scale rotor head for EC 145 and Bo 105 for 10mm or 12mm rotor shaft.
Blade mount 14mm, blade retaining screw 5mm, for rotor diameter up to 2,0 meter.
Price: Alu natural 1199,00€ incl. 19% VAT.
Super Scale rotor head for EC 145 and Bo 105 for 12mm or 15mm rotor shaft.
Blade mount 14mm, blade retaining screw 5mm, for rotor diameter up to 2.6 meters.
Price: 1499,00€ incl. 19% VAT.
Scale rotor head for Ecureuil and EC 130 for 12mm or 15mm rotor shaft.
Blade mount 14mm, blade retaining screw 5mm, for rotor diameters up to 2.6 metres.
Price: 1998,00€ incl. 19% VAT.
Our swashplates are assembled with dust-protected ball bearings and spherical bearings of the highest quality. The ball heads and balls are also of the highest quality, smooth-running and yet free of play. Even during transport and under heavy load, the ball head cannot jump off the ball.
The swashplate outer diameter 85mm or 105mm, is available for 12mm and 15mm main rotor shafts.
120° swashplate has an outer diameter of 105mm.
The matching ball joints with ball for 3mm control rods and matching screws with cap nuts are included.
Prices:
010002 version 2 blade 209,90€
010003 version 3 blade 209,90€
010004 version 4 blade 209,90€
010005 Version 5 leaf 209,90€ incl. 19% VAT
When ordering with 3 point linkage simply specify 120°.
Swashplate guide aluminium 39,50€ / swashplate guide 3-piece brass 98,00€ / swashplate driver 79,00€ incl. 19% VAT.
Swashplate “Gazelle & Blue Thunder
Swashplate “Lama & Alouette III
Scale swashplate for Vario-Lama “for retrofitting”
– Swash plate 3blade 4point 90° linkage 12mm
– Swash plate driver 12mm
– Bellows
– 7x ball joint with ball (best quality)
– Screws and bolts
– Spherical bearing (best quality)
– Sealed ball bearing (best quality)
– Aluminium natural, not anodised
Price: 559,00€ incl. 19% VAT.
Swash plate “EC 130 and Ecureuil”
Control rods with M3 left-hand and M3 right-hand threads. To adjust the tracking you only need to turn the linkage.
Length 50mm results in a distance from centre ball to centre ball of approx. 65mm to 85mm.
Length 60mm results in approx. 75mm to 95mm
Length 70mm results in approx. 85mm to 105mm
Length 80mm results in approx. 95mm to 115mm
Length 90mm results in approx. 105mm to 125mm
Length 100mm results in approx. 115mm to 135mm
Prices per piece incl. 19% VAT:
010050 Control rod 50mm 12,95€
010060 Control rod 60mm 13,95€
010070 Control rod 70mm 14,95€
010080 Control rod 80mm 15,95€
010090 Control rod 90mm 16,95€
010100 Control rod 100mm 17,95€
9930090 Ball joint with ball 2,45€
in best quality.